Voltage stabilizer lioa jumped aptomat, why? Causes and remedies for voltage stabilizer lioa jumping aptomat at home.
First we need to briefly understand what Aptomat is, what is the role of Aptomat for Lioa Voltage Stabilization.
The name Aptomat probably everyone has heard when referring to electrical appliances, it is a type of circuit breaker with automatic switching.
It has the function of protecting the electrical system from overload, short circuit, anti-electrical leakage, anti-shock,..
There are many types of Aptomat on the market, but most of them have the same basic structure, consisting of two levels of contacts, the main contact and the arc;
There are many types of Aptomat on the market, but most of them have the same basic structure including two contact levels: main contact and arc or three contacts including main contact, auxiliary contact and arc. When the circuit is closed, the contacts will close one by one from the arc to the auxiliary contact and finally the main contact. The process of opening the contacts will be reversed if the circuit is interrupted.
Working principle of Aptomat: When detecting a faulty condition occurring in the electrical system, the protective hooks will do the job of circuit breaker.
In case the voltage is too low, the current flowing through the contacts changes suddenly, the magnetic field created on the spring will be reduced, or when the voltage is too high, the spring will heat up too much, causing the contacts to open and the current is interrupted.
(Voltage stabilizer lioa jumped aptomat, why?)
So why does the lioa voltage stabilizer jump aptomat?
1.Due to overload: Observing meter A in front of the voltage stabilizer, lioa sees the needle ~ equal to the rated overcurrent indicated on the Aptomat in front of the voltage stabilizer, lioa. It’s voltage stabilizer lioa is overloaded, Aptomat jumps to protect voltage stabilizer, lioa.
»To fix the above error, you need to upgrade to a lioa voltage stabilizer with a larger capacity to match the amount of capacity of the electrical equipment you are using.
Or turn off the load and then restart the voltage stabilizer, lioa.
(Voltage stabilizer lioa jumped aptomat, why?)
2.Due to the high inlet current, the lioa voltage stabilizer is aptomat jumped to protect the overvoltage.
»In this case, you just need to wait for the power to stabilize and then restart the voltage stabilizer.
(Voltage stabilizer lioa jumped aptomat, why?)
3.Due to the failure of the aptomat control circuit, the lioa voltage stabilizer jumps aptomat when the output voltage remains stable.
»To fix it, you just need to replace the control circuit and the lioa voltage stabilizer can be used normally.
(Voltage stabilizer lioa jumped aptomat, why?)
4.The lioa voltage stabilizer has an aptomat jump when the output voltage is too high because the lioa voltage stabilizer is damaged, the voltage stabilizer function is unstable.
At this point, the overvoltage protection function will work to cut off the voltage, otherwise the electrical equipment will burn.
» In this case, the lioa voltage stabilizer needs to be repaired and replaced with the control circuit mechanism for the lioa voltage stabilizer to work normally.
(Voltage stabilizer lioa jumped aptomat, why?)
5. Another cause is very rare but can still happen that is due to a broken aptomat.
» To fix it, you just need to buy a replacement aptomat.
You have reached your daily translation maximum – please come back tomorrow
If you have consulted and fixed the error according to the article but the Lioa voltage stabilizer has a circuit breaker and the error does not go away, you should contact the product warranty center directly for support and warranty.
(Voltage stabilizer lioa jumped aptomat, why?)
**************************************************** *****************
Mọi chi tiết xin liên hệ/For further details, please contact:
logo-hà lanVOLTAGE STABILIZER – PERFECT SOLUTION TO OVERWEAK POWER
Genuine 4 YEAR warranty
100% COPPER WIRE
Fast response speed
VOLTAGE STABILIZER – PERFECT SOLUTION TO REMEDY WEAK ELECTRICITY GENUINE WARRANTY 4 YEARS 100% COPPER WIRE Fast response speed
******************************* ******************* *******************
Hotline: 1900 633 550
Technical advice:(+84)932 203 866
Hotline: 1900 633 550 Technical advice:(+84)932 203 866
MIEN BAC RESEARCH AND MANUFACTURING GRID DEVICES JOINT STOCK COMPANY
Factory: AN KHANH Industrial Park – HANOI-VIETNAMESE
Factory: AN KHANH INDUSTRIAL PARK – HANOI-VIETNAMESE
Hotline : 1900 633 550
Fanpage: Hà Lan
Email: thietbidienluoimienbac@gmail.com; autovoltagestabilizer.vn@gmail.com
Xem sản phẩm khác/View other products here
Xem sản phẩm Haland 5kva tại đây
Xem sản phẩm Haland 7kva tại đây
Xem sản phẩm Haland 10kva tại đây
Xem sản phẩm Haland 15kva tại đây